Skip to content

Need Help With Your Order?

Call Our Sales Team On: +1 424 303 7005

  • +1 424 303 7005  |  Mon-Fri: 7am-4pm
  • Secure Payment: Accepted payment types
  • Worldwide Delivery Service

360 Modena

The 360 Modena was the first road-going Ferrari constructed entirely in aluminium including the monocoque chassis, bodyshell and suspension wishbones allowing weight-saving benefits and increased performance of previous mid-engine V8 cars. Launched at the Geneva Motor Show in 1999, the 360 Modena was a radical departure for Ferrari even down to the removal of the previously-iconic central egg crate “radiator” grille.

360 Modena at GTO House
360 Modena at GTO House

Replacing them are twin radiator inlet grilles, one either side, allowing airflow to pass under the raised centre section to feed via the flat bottom to the twin rear diffuser section, increasing downforce as the car’s speed increases. However, some retro detail was included, for example the engine compartment intakes in the rear wings that hinted of the Dino, plus the traditional paired rear light design.

The 360 Modena F1 Interior
The 360 Modena F1 interior

The engine is a development of that designed for the F355 with a small increase in cubic capacity to 3.6 litres, hence the 360 model name. A longitudinally mid-mounted 90 degree V8 engine had an actual cubic capacity of 3586cc, with a bore and stroke of 85mm x 79mm, five valves per cylinder, twin overhead camshafts per bank, and dry sump lubrication.

360 Modena Engine Bay
360 Modena Engine Bay

As you will see from this site, GTO Parts offer an extensive range of specialist components for the 360 Modena as well as the 360 Spider and Challenge Stradale. In both our LA and UK workshops, we offer a Fixed Price Servicing Program for the 360 offering a simple route to servicing with all work undertaken by our factory-trained engineers.

Engine

Type: rear, longitudinal 90⁰ V8
Bore and Stroke: 85 x 79mm
Total Displacement: 3,586cc
Compression Ratio: 11:1
Maximum Power: 395bhp at 8,500rpm

Chassis and Suspension

Frame: aluminium spaceframe
Front Suspension: independent, unequal-length wishbones, coil springs, telescopic shock absorbers, anti-roll bar
Rear Suspension: independent, unequal-length wishbones, coil springs, telescopic shock absorbers, anti-roll bar
Brakes: discs
Gearbox: 6 speed + reverse (F1 electro-hydraulic 6 speed + reverse)
Front Tyres: 215/45 ZR 18
Rear Tyres: 275/40 ZR 18
Fuel Tank: 95 litres – 20.9 gallons

Dimensions and Weight

Type: coupé
Wheelbase: 2,600mm
Front Track: 1,669mm
Rear Track: 1,617mm
Dry Weight: 1,290kg

Performance

Maximum Speed: 183 mph - 295 km/h